CAN Bus Protocol Analyzer
CAN stands for Controller Area Network. It was originally developed by Robert Bosch GmbH as a reliable communications bus for automotive systems. Due to its robust noise immunity, fault tolerance, and low cost, it is used extensively in modern automobiles, heavy equipment, factory automation and sea-craft.
The CAN Bus Protocol Analyzer is one of many signal decoders included with all DigiView Logic Analyzers.
The DigiView software provides extensive navigation, search, measurement, export, plot and printing capabilities to all signal types. The CAN Bus Protocol Analyzer adds CAN Bus specific decoding and configuration options.
We decode the entire CAN 2.0B specification, including:
- Base and Extended Frame formats
- Data Frames
- Remote Frames
- Overload Frames
- Error Frames
Configuration options include:
- Baud rate
- Propagation Delay
- Maximum sync adjust
- Glitch Filtering
- Show/Hide Control bits
- Show/Hide Delimiters
- Show/Hide CRC
Demo Video
Help Video
CAN BUS
More information
PO Box 2408
Rowlett, TX 75030-2408
Rowlett, TX 75030-2408
voice: 972-272-9392
FAX: 972-494-5814
FAX: 972-494-5814
Copyright © 2022 TechTools. • TechTools, DigiView, ACM, ClearView, CVASM, EconoROM, FlexROM, QuickLoader, QuickWriter, TDE and UniROM are trademarks of TechTools, P.O. Box 2408 Rowlett, Texas 75030-2408 • PIC and PICmicro are registered trademarks of Microchip Technology Inc.
Continued use of this website indicates your acceptance of our Policies, including Terms of Use and Privacy.